• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Place of Origin: China (Mainland)
  • Brand Name: V-MARK
  • Model Number: HI-INT-180012
  • DOT MARK: Yes
  • Size: 6" X 6" Red White / 7" x 11" White Red
  • Other Size: 1, 2, 3, 4 inch Width are Available
  • Logo Imprinting: Acceptable
  • Perforating: Workable
  • Durability: 7 Years
  • Standard: Conform to DOT FMVSS 108
  • Color: Red White
  • Technology: Micro Glass Bean Technology

Packaging & Delivery

Packaging Details Export Carton packing
Delivery Time 7-30 Days


V-MARK™ Reflective Material - Vehicle Conspicuity Markings 6” White and 6” Red (6” x 6”) With Kiss-Cutting Line HI-INT-180012


V-MARK™ Reflective Material – Vehicle Conspicuity Markings 6”x6 # HI-INT-180012 consists of a smooth, flat, transparent exterior film with retro-reflective elements embedded beneath the film so as to form a non-exposed retro-reflective optical system. It is a so called non-exposed, air-cell, micro-glass bead retro-reflective technology.

V-MARK™ Reflective Material – Vehicle Conspicuity Markings 6”x6 # HI-INT-180012 are backed with pressure-sensitive adhesive and polyethylene coated paper liner. If they are applied to properly prepared surfaces, Vehicle Conspicuity Markings should provide a long time of field performance.

V-MARK™ Reflective Material – Vehicle Conspicuity Markings 6”x6 # HI-INT-180012 are made strictly according to FMVSS 108, ASTM D4956



7 Years Durability

Conform to DOT FMVSS 108

Alternting 6” White Color and 6” Red Color

Weathering Resistance

High Intensity Grade Retro Reflective Performance

1” 2”, 3” 4” Width are Available

Logo Imprinting is Acceptable

Perforating is Workable

OEM Packaging


Physical Performance

V-MARK™ Reflective Material – Vehicle Conspicuity Markings 6”x6 # HI-INT-180012 are certified to meet the requirements of FMVSS 108 / ASTM D4956. The following technical information should be considered typical only and should not be used for specification purposed.


Physical Property Adhesion (ASTM D4956)

Test Method: 90°C Hanging Weight

FMVSS 108 Requirements: < 2 Inch (55 mm) Movement Shrinkage (ASTM D4956)

Test Method: 9x9 Inch Panel

FMVSS 108 Requirements: < 1/8 Inch change on



Test Method: Wrap around a 1/8” mandrel @ 32°F (0°C)

FMVSS 108 Requirements: No Cracking Impact Resistance

Test Method: 100 In-Lb, 5/8 Inch Tip

FMVSS 108 Requirements: No Damage Outside Impact


Chemical Resistance

Test Method: (SAE J1967)

Test Result: Not Affected by toluene, #2 diesel fuel, gasoline (Leaded) Kerosene, TSP Detergent, Xylene, Dilute Metal Brighteners


Corrosion Resistance

Test Method: (ASTM B-117 Salt Spray)

Test Result: No Effect 1000 Hours

Minimum Application Temp. : 60°F (150°C)


High Pressure Wash

Test Method: 45° Angle, 1200 psi, 8 Inch Away

Test Result: No Peeling Off


Retroreflective Performance

V-MARK™ Reflective Material – Vehicle Conspicuity Markings 6”x6 # HI-INT-180012 conforms to the photometry requirements of GRADE DOT-C2 showed in the following table when tested according to the retro reflective sheeting photometry procedure stated in FMVSS 108 Appendix G.



FMVSS 108 Retro Reflective Sheeting Photometry Requirements





0.2°-4° 250601654012530
30° 250601654012530
45° 60154010308
0.5°-4° 65154310338
30° 65154310338
45° 15410382



While use V-MARK™ Reflective Material – Vehicle Conspicuity Markings enhances visibility, no reflective material can guarantee absolute visibility, particularly in adverse weather conditions. Performance will vary depending upon actual use, exposure conditions and maintenance. Users should test reflective material to satisfy conformance to their own requirements.





Routine washing is recommended for maximum performance. The following cleaning methods are recommended.

• Wash with sponge, cloth or soft brush using water and detergent.

• Automatic truck/car wash or standard high-pressure hand spray:

Maximum pressure-1200 PSI/ 80 bar.

Maximum water/wash solution temperature- 140°F/ 60°C.

Minimum of 12 inches/ 30cm distance of cleaning jet(s) from markings.

Cleaning wand or jets to be at no greater angle than 45 degrees from perpendicular to the marking surface.

• When using metal brighteners, follow manufacturer’s recommendations for dilution.

Thoroughly rinse from markings after soaking vehicle.



• Cool, dry area out of direct sunlight.

• Temperature 65-75°F (18-24°C) humidity 30-50%.

• Store rolls horizontally, in carton or in original packaging.


Shelf Life

• Apply V-MARK™ Reflective Material – Vehicle Conspicuity Markings 6”x6 # HI-INT-180012 within two years of receipt of material.

General Performance Considerations

V-MARK™ Reflective Material – Vehicle Conspicuity Markings 6”x6 # HI-INT-180012 will provide maximum durability when:

• Recommended procedures are followed.

• Marking is applied to vertical surfaces.

Actual durability will be based on actual customer use, field testing, exterior exposed testing and artificial weathering testing.

Durability can be reduced if recommended techniques are not followed:

• Failure to cut markings around rivets, seams and body are panels.

• Improper use of high pressure cleaning.

• Spillage of chemicals or solvents.

• Improper application or surface preparation.


Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview


Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
China (Mainland) | Trading Company
Supplier Assessments:
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $45,000
Learn More