Alternating 11'' red / 7'' white,Alternating 6'' red / 6'' white
Retro Reflective Technology:
Micro Glass Bead
Perforating, Logo Imprinting
FMVSS 108,ASTM D4956,DOT Certification
Packaging & Delivery
Used School Buses Reflective Tape
1.Meet FMVSS 108, ASTM D4956, DOT Certification
2.Red White Color
V-MARK™ Reflective Material - Yellow Color Vehicle Conspicuity Markings HI-INT-1800YW
V-MARK™Reflective Material – Yellow Color Vehicle Conspicuity Markings HI-INT-1800YW consists of a smooth, flat, transparent exterior film with retro-reflective elements embedded beneath the film so as to form a non-exposed retro-reflective optical system. It is a so called non-exposed, air-cell, micro-glass bead retro-reflective technology.
V-MARK™ Reflective Material – Yellow Color Vehicle Conspicuity Markings HI-INT-1800YW are backed with pressure-sensitive adhesive and polyethylene coated paper liner. If they are applied to properly prepaYellow surfaces, Vehicle Conspicuity Markings should provide a long time of field performance.
V-MARK™ Reflective Material – Yellow Color Vehicle Conspicuity Markings HI-INT-1800YW are made strictly according to FMVSS 108, ASTM D4956
7 Years Durability
Conform to DOT FMVSS 108
High Intensity Grade Retro Reflective Performance
1” 2”, 3” 4” Width are Available
Logo Imprinting is Acceptable
Perforating is Workable
V-MARK™ Reflective Material – Yellow Color Vehicle Conspicuity Markings HI-INT-1800YW are certified to meet the requirements of FMVSS 108 / ASTM D4956. The following technical information should be consideYellow typical only and should not be used for specification purposed.
Physical Property Adhesion (ASTM D4956)
Test Method: 90°C Hanging Weight
FMVSS 108 Requirements: < 2 Inch (55 mm) Movement Shrinkage (ASTM D4956)
Test Method: 9x9 Inch Panel
FMVSS 108 Requirements: < 1/8 Inch change on
Test Method: Wrap around a 1/8” mandrel @ 32°F (0°C)
FMVSS 108 Requirements: No Cracking Impact Resistance
Test Method: 100 In-Lb, 5/8 Inch Tip
FMVSS 108 Requirements: No Damage Outside Impact
Test Method: (SAE J1967)
Test Result: Not Affected by toluene, #2 diesel fuel, gasoline (Leaded) Kerosene, TSP Detergent, Xylene, Dilute Metal Brighteners
Test Method: (ASTM B-117 Salt Spray)
Test Result: No Effect 1000 Hours
Minimum Application Temp. : 60°F (150°C)
High Pressure Wash
Test Method: 45° Angle, 1200 psi, 8 Inch Away
Test Result: No Peeling Off
V-MARK™ Reflective Material – White Color Vehicle Conspicuity Markings HI-INT-1800WH conforms to the minimum coefficient of retroreflection requirements of type III reflective sheeting in D4956-09 showed in the following table.
While use V-MARK™ Reflective Material – Vehicle Conspicuity Markings enhances visibility, no reflective material can guarantee absolute visibility, particularly in adverse weather conditions. Performance will vary depending upon actual use, exposure conditions and maintenance. Users should test reflective material to satisfy conformance to their own requirements.
Daytime Color (x,y,Y)
The chromaticity coordinates and total luminance factor of the Vehicle Conspicuity Markings conform to Table A Daytime Color Specifications Limit (see Note 1).
Color Test – Ordinary Colored Sheeting Conformance to standard chromaticity (x, y) and luminance factor (Y %) requirements shall be determined by instrumental method in accordance with ASTM E 1164 on sheeting applied to smooth aluminum test panels.
The values shall be determined on a spectrophotometer.
Computations shall be done for CIE Illuminant D65 and the 2° standard observer (see Note 2)
Daytime Luminance Limit
Note 1 : The four pairs of chromaticity coordinates determine the acceptable color in terms of the CIE 1931 Standard Colormetric System.
Note 2 : The instrumentally determined color values of retroreflective sheeting can vary significantly depending on the make and model of colorimetric spectrophotometer as well as the color and retro reflective optics of the sheeting.
Routine washing is recommended for maximum performance. The following cleaning methods are recommended.
• Wash with sponge, cloth or soft brush using water and detergent.
• Automatic truck/car wash or standard high-pressure hand spray:
Maximum pressure-1200 PSI/ 80 bar.
Maximum water/wash solution temperature- 140°F/ 60°C.
Minimum of 12 inches/ 30cm distance of cleaning jet(s) from markings.
Cleaning wand or jets to be at no greater angle than 45 degrees from perpendicular to the marking surface.
• When using metal brighteners, follow manufacturer’s recommendations for dilution.
Thoroughly rinse from markings after soaking vehicle.
• Cool, dry area out of direct sunlight.
• Temperature 65-75°F (18-24°C) humidity 30-50%.
• Store rolls horizontally, in carton or in original packaging.
• Apply V-MARK™ Reflective Material – Yellow Color Vehicle Conspicuity Markings HI-INT-1800YW within two years of receipt of material.
General Performance Considerations
V-MARK™ Reflective Material – Yellow Color Vehicle Conspicuity Markings HI-INT-1800YW will provide maximum durability when:
• Recommended procedures are followed.
• Marking is applied to vertical surfaces.
Actual durability will be based on actual customer use, field testing, exterior exposed testing and artificial weathering testing.
Durability can be Yellowuced if recommended techniques are not followed:
• Failure to cut markings around rivets, seams and body are panels.